Integrityhifi TRU-LIFT Automatic Tonearm Lifter

 

“Well-engineered, beautifully finished and wonderfully executed; the Tru-Lift not only looks the part but makes good on its promise. Treat the Tru-Lift as you would your insurance policy. It might cost you a little up front, but, when you need it, it could save you quite a bit in the long-run.”

— JAY GARRETT, STEREONET UK

 

“The Tru-Lift is truly one of those products that just does what it is supposed to do. It is well built and beautifullly engineered, doesn’t affect the sound of your vinyl spinner in any way and adds to the lifespan of your cartridge–what’s not to like. I reckon the Tru-Lift is well worth the asking price and pretty much an essential bit of kit if you have spent a decent sum on your cartridge.”

— STUART SMITH, HIFI PIG

 

Which one is right for me? Measure your turntable, it’s easy

Note: There are just too many variations and adjustments for us to know what you need, even if it’s a turntable brand we sell. PLEASE MEASURE YOUR TURNTABLE YOURSELF.

Tru-Lift Models 1-4 are now available in both stainless steel and brass. This only applies to the standard models; the models with base are only available in stainless steel. 

Tru-Lift has videos, photos, and diagrams on their website.

Model #1:  Adjustable Height 1 1/4″ to 1 5/8″

Model #2:  Adjustable Height 1 5/8 to 2″

Model #3:  Adjustable Height 2″ to 2 3/8″

Model #4:  Adjustable Height 2 3/8″ to 2 3/4″

With or without a base?

The optional base on the various models add a bit of weight and stability, plus give a slightly different aesthetic to the lifter as well as added height. Each base adds 3/8″ to the total height of the lifter. For example, If you purchase the Model 1 + Base, it will be the same height as the Model 2 without a base. 

The total adjustable height of each option with the base is listed below:

Model #1 + Base:  Adjustable Height 1 5/8″ to 2″ 

Model #2 + Base:  Adjustable Height 2″ to 2 3/8″

Model #3 + Base:  Adjustable Height 2 3/8″ to 2 3/4″

Model #4 + Base:  Adjustable Height 2 3/4″ to 3 1/8″

Model #4 + Base (x2): Adjustable Height 3 1/8″ to 3 1/2″

Model #4 + Base (x3): Adjustable Height 3 1/2″ to 3 7/8″

 

Footprint diameter without base: 3/4″

Footprint diameter with base: 1-1/2″

Do you have a Rega Planar 8 or 10 with the skeletal plinth? TRU-LIFT model 4 with 2 bases will be the right one for the FITTED COVER ONLY.